A problem has been detected and browser has been go fullscreen to prevent
damage to your computer.

REQUEST_FULL_SCREEN

If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow these steps:

Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any updates you might need.

If problems continue disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use Safe Mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.

Or just press Esc or F11.

Technical information:

***STOP: 0x00000054 (0x68697320, 0x00000069, 0x73206661, 0x00006B65)

inkjet
Brother
DCP
FAX
INTELLIFAX
MFC
Canon
BJ
I
S
BJC
FAX
B
EB
JX
LBP
MAXIFY
MF
IP
PIXMA
IP
IX
Ink Efficiency
MG
MP
MX
TR
TS
Epson
L
Colorio
EcoTank
L
M
EcoTank Pro
L
M
Expression Home
XP
Expression Premium
XP
Stylus
B
BX
C
CX
DX
L
M
NX
S
SX
T
TX
Stylus Office
B
BX
T
TX
Stylus Photo
L
P
PX
R
RX
T
TX
WorkForce
K
WF
HP
Business InkJet
Color Copier
Color LaserJet Pro
DesignJet
DeskJet
Ink Advantage
Ink Advantage Ultra
FAX
Ink Tank
OfficeJet
OfficeJet Pro
PSC
PhotoSmart
PhotoSmart Pro
Smart Tank
Lexmark
JetPrinter
OKI
OkiData

reset ok

laser
Brother
DCP
FAX
HL
MFC
Canon
FAX
FC
FaxPhone
IR
ImageClass
LBP
LaserClass
MF
MultiPAss
NP
PC
HP
Color Laser
Color LaserJet
Color LaserJet Enterprise
Color LaserJet Pro
Laser
LaserJet
MFP
LaserJet Enterprise
MFP
LaserJet Enterprise 500 Color
LaserJet Enterprise Flow
LaserJet Pro
MFP
LaserJet Pro 100 Color
LaserJet Pro 200 Color
LaserJet Pro 400
LaserJet Pro Color
LaserJet Ultra
Laserjet Pro 300 Color
Laserjet Pro 400 Color
Neverstop Laser
TopShot Laserjet Pro
Konica Minolta
Bizhub
Kyocera
ECOSYS
FS
KM
Lexmark
LaserPrinter
Optra
Panasonic
KX
FL
FLB
FLC
FLM
MB
Pantum
M
P
Ricoh
Aficio
Samsung
CLP
CLX
ML
SCX
SF
SL
Xpress
Sharp
AL
AR
Toshiba
e-Studio
Xerox
DocuPrint
Phaser
WorkCentre
WorkCentre Pro

reset ok

Supplies
Toner cartridges
Manufacturer
ColorWay
PrintPro
PrintPro NS
Compatibility
Brother
Canon
HP
Konica Minolta
Kyocera
OKI
Panasonic
Pantum
Ricoh
Samsung
Xerox

Color
black
cyan
magenta
yellow

reset ok

Photo paper
Manufacturer
ColorWay
Kodak
PrintPro
Serie
ART canvas
ART magnetic
ART T-shirt transfer
ART texture
Dual-side
Glossy
Matte
Microporous
Roll
Special

Format Sheets qty.
10х15
13х18
Letter
A4
A3
A3+
210mmX10m
297mmX10m
610mmX18m
610mmX30m
914mmX30m
5
10
20
50
100
500
1 Roll
1000
120
800

-

reset ok

Ink
Manufacturer
ColorWay

Compatibility
Brother
Canon
Epson
HP

Type
Dye-based (W)
Pigment (P)
Pigment/Dye-based (P/W)
Refill kit (RK)
Sublimation (S)
UV Dye-based (UV)

Capacity
100 ml
135 ml + 3 x 70 ml
127 ml + 3 x 70 ml
200 ml
127 ml
1000 ml
70 ml
4 x 100 ml
140 ml
6 x 100 ml
140 ml + 4 x 70 ml
2 x 20 ml
4 x 70 ml
3 x 20 ml
150 ml
4 x 200 ml
135 ml
6 x 200 ml

Color
black
cyan
gray
light cyan
light magenta
magenta
photo black
yellow

reset ok

Toner
Manufacturer
ColorWay
PrintPro
Compatibility
Brother
Canon
HP
Konica Minolta
Kyocera
Lexmark
OKI
Ricoh
Samsung
Sharp
Toshiba
Xerox

Color
black
cyan
magenta
yellow

reset ok

Spare parts
Manufacturer
PrintPro
Compatibility
Brother
Canon
HP
Konica Minolta
Lexmark
Samsung
Xerox

Type
Cleaning Blade
Doctor blade
Fuser Film Sleeve
Fuser Pressure Roller
Grease
Heating Element
Heating lamp
Magnetic roller bushing set
Magnetic roller shell without bushings
Magnetic roller without bushings
Magnetic roller
OPC Drum
Package
Paper Pick-Up Roller
Primary Charge Roller
Repair Kits
Rubber roller Bushing Sets
Separation Pad
Spray
Teflon Roller
Teflon roller Bushing Sets
Zinc powder fo OPC

reset ok

Mobile Accessories
Tempered Glass
Manufacturer
ColorWay
Compatibility
Apple
Blackview
Honor
Infinix
Lenovo
Motorola
Nokia
OPPO
Realme
Samsung
Tecno Spark
Xiaomi
ZTE
Type
For smartphones
For tablets
Coat type
full cover & glue
full cover & glue Anti-Spy
glossy 2.5D

reset ok

Protective Case
Manufacturer
ColorWay
Compatibility
Apple
Honor
Infinix
Lenovo
Motorola
Nokia
OPPO
Realme
Samsung
Tecno Pop
Tecno Spark
Universal
Xiaomi
ZTE
Type
Artificial leather + microfiber
Hard PC+ Soft TPU
leather + microfiber
Liquid Silicone
PC Carbon
Plastic
Simple Book
Smart Clear
Smart Matte
Space Series
TPU
TPU AntiShock
TPU Clear
TPU Matte
TPU polycarbonate
TPU Shine
waterproof
Use
For smartphones
For tablets

reset ok

Charges
Manufacturer
ColorWay
Color
black
blue
gray
light blue
pink
red
white
Type
AC
Automobile
Whireless
Count USB Port
1
2
3
4
6
no
Amperage
1.0A
1.1A
2.0A
2.1A
2.4A
3.0A
3.0A
3.4A
3.6A
4.0A
4.8A
5.0A
7.0A
8.0A

reset ok

Cables, Adapters & USB Hubs
Manufacturer
ColorWay
Type
adapter
charge
router power
sync
USB hub
Connector
Adapter/Перехідник
Type-C - DC 5.5х2.5mm
Type-C - Type-C
Type-C – Lightning
Type-C – Lightning-MicroUSB-TypeC
USB - Type-C
USB hub/dock station
USB – Lightning
USB – Micro-USB
Length of cable
1 m
0 m
2 m
1.2m
0.22 m
0.25 m
0.3 m
0.17 m
0.12 m
35-150см
Color
black
blue
dark grey
gray
green
pink
purple
red
Ukraine
white
yellow

reset ok

Powerbanks and UPS
Manufacturer
ColorWay

Color
black
blue
gray
green
red
white

Type
Charging Station
Powerbank
UPS for router

Material
Metal
PC + ABS
Plastic

Capacity
30000 mAh
8800 mAh
60000 mAh
40Ah/ 2048Wh
50000 mAh
10000 mAh
40000 mAh
20000 mAh

reset ok

Accessories
Headphones
Type
3.5 мм (mini-Jack)
TWS (2 separate)
Manufacturer
ColorWay
Color
beige
black
white

reset ok

Antiseptics
Manufacturer
ColorWay
Type
Aerosol
Gel
Liquid
Wipes

reset ok

Cleaners
Manufacturer
ColorWay
Series
Standard
Use
Automobile
Cleaning Liquid
For TV/LED/LCD screens
Laptops & Monitors
Photos & Video equipment
Smartphones & Tablets
Special
Wipes

reset ok

Power Socket
Type
Power Socket
Timer socket
Voltage relay
Manufacturer
ColorWay
Count of power outlets
1
2
3
4
5
6
Count of USB outputs
0
3
4
6
Length of cable
0 m
2 m
1.8 m
3 m
5 m
2.5 cm
Color
black
white

reset ok

Smart Home
Type
Smart WiFi Socket
Wi-Fi Smart Lamp Holder
Manufacturer
ColorWay
Count of power outlets
0
1
2

reset ok

Rechargeable USB Batteries
Batteries
LED lamp
Manufacturer
ColorWay
Type
LED strip
Nightlight
Portable
Tabletop
Count of USB outputs
1
2
4
Wireless
no
yes
Touch
no
yes
Color
black
white

reset ok

Christmas Decorations
Type
Christmas balls set
Christmas wreath
Gift Sock
LED garland
Manufacturer
ColorWay
Color
black
dark grey
gold
gray
green
light blue
pearl
red
RGB
silver
transparent
white
zink

reset ok

Notebook bags
Type
backpack
bag
Manufacturer
ColorWay
Color
black
blue
gray
purple
white

reset ok

Speakers & Accessories
Manufacturer
ColorWay
Type
Car Mount Holder
CarWireless Charger/ Mount Holder
Stand - holder

reset ok

Use limitations


09 February 2022
  1. Toner/Ink
  2. Photo Paper
  3. Continuous Ink Supply System (CISS)
  4. Refillable Cartridge Sets (RCS)
  5. Cleaning Kits and Wipes
  6. Tempered Glass
  7. Garland
  8. Power strip
  9. Car, wall, wireless chargers

Toner/Ink

  1. Keep items containing toner or ink out of the reach of children.
  2. If toner or ink is spilled, do not inhale or swallow it.
  3. Avoid contact with eyes and skin.
  4. In case of contact with skin, wash it with soap and water.
  5. Keep ink or toner tightly closed till the next use.
  6. Avoid the exposure to direct sunlight and heat.
  7. Avoid sudden changes in temperature and humidity.
  8. Please note that most toner cartridges should not be thrown away, but re-packaged properly and returned to shipping/receiving for recycling.
  9. Do not flush toner or ink.
  10. Toner cartridges should always be disposed off in an appropriate container or bin.
  11. Dispose empty ink or toner cartridges in plastic bags only.
  12. Do not try to force open or destroy items containing toner or ink.
  13. Do not add to the ink or toner any other fluids or acids.
  14. Do not try to set parts containing toner or ink on fire.

Photo Paper

  1. Keep paper in dark, cool, relatively dry areas.
  2. Avoid exposure to ultraviolet rays such as sunlight and fluorescent lamp.
  3. Do not leave the paper under the influence of a strong light for a long time.
  4. Upon storage the paper avoid sudden changes in temperature and humidity.
  5. Avoid storing paper in attics, kitchens, garages, and basements.
  6. Keep paper in its original packaging.
  7. Paper should be stored on shelves, or closets.
  8. Do not keep food or drinks near paper storage area. (?)
  9. It is recommended to store printed photos in photo albums, books, frames, special cases, envelopes etc.
  10. Don’t store photographs with newspaper clippings.
  11. Do not use scraps of paper for printing.
  12. Do not use paper containing clips, pins and other items.
  13. It is absolutely forbidden to use items not designed for printing.
  14. Do not open sealed packages until you are ready to load them into the printer.

Continuous Ink Supply System (CISS)

  1. Keep the ink out of the reach of children.
  2. Do not drink the ink.
  3. Do not eat containers.
  4. Avoid contact with eyes.
  5. Avoid exposure to direct sunlight.
  6. Do not tilt or turn the CISS during long-term storage.
  7. Do not locate external tanks higher or lower than printer level.
  8. Do not lift external tanks above the level of cartridges (print head).
  9. Air filters (their membranes) must be clean and dry. Avoid contact with water or any other liquid.
  10. Do not print without ink in the cartridges.
  11. Do not print with the excessive or low amount of ink in the cartridges.
  12. Print not less than once per week.
  13. Do not mix different types and brands of ink.
  14. Use only high-quality ColorWay ink.
  15. Do not turn the ink tanks during printing.
  16. Do not dismantle the ink cartridges of CISS.
  17. Do not touch and do not harm the chips of CISS cartridges.

Find out more about proper use of ink under the head Ink Use limitations.

Refillable Cartridge Sets (RCS)

  1. Keep all the items out of the reach of children.
  2. Do not eat cartridges.
  3. Do not keep empty cartridges outside the printer till refilling.
  4. Keep the cartridge in a 'print head down' position as much as possible.
  5. Do not leave cartridges out for days or week.
  6. Do not put your cartridges in plastic bags to avoid refilling problems in the future.
  7. Do not refill cartridges in the printer.
  8. Do not print with one color empty.
  9. Refill the cartridge when one color begins to fade
  10. Refill cartridges as soon as possible after running out.
  11. Do not print without ink in the cartridges.
  12. Do not print with the excessive or low amount of ink in the cartridges.
  13. Do not throw away the clip.
  14. Do not damage the inside film on the walls of the cartridge.
  15. Do not remove the clip with an open intake hole.

Find out more about proper use of ink under the head Ink Use limitations.

Cleaning Kits and Wipes

  1. Keep all the items out of the reach of children.
  2. Do not inhale or drink cleaning solutions.
  3. Avoid contact with eyes and skin.
  4. Avoid exposure to direct sunlight.
  5. Seal up bottles with cleaning solution till the next use.
  6. Do not mix cleaning solutions with other fluids.
  7. Do not mix cleaning solution with acids.
  8. Do not to apply the product to the areas and equipment not intended for use.
  9. Use only the microfiber cloth with the cleaning solution. Do not apply materials on hand.
  10. Do not overwork or apply excessive pressure to avoid damaging the surface or surface coatings.
  11. Do not press on the screen with your fingernails or other objects.
  12. Spray an adequate amount of the cleaning solution onto one portion of the cloth.
  13. Do not apply on heated surfaces.
  14. Do not use cleaning solution when your electronic device switched on.
  15. Do not allow liquid to run into the edges under the frame of the screen.

Tempered Glass

  1. Keep tempered glass out of the reach of children.
  2. Do not taste tempered glass.
  3. Make sure you have tempered glass required for your model.
  4. Do not install tempered glass on dirty screens.
  5. Do not install tempered glass with dirty hands.
  6. Do not install tempered glass in underlit areas.
  7. Do not install tempered glass in dusty environment.
  8. Do not install tempered glass on wet screens.
  9. Do not use adhesive tape or washi tape for screen cleaning before tempered glass installation.
  10. Do not touch any inner and an outer surface of the glass.
  11. It is not recommended to install tempered glass with device switched on.

Garland

  1. Remove the garland from the packaging and check the insulation integrity of the power cord.. Pay special attention to the insulation and connection of wires.
  2. It is forbidden to operate the garland with a damaged power cord or damaged cable insulation. It is forbidden to cut the garland
  3. Mount the garland at the place of use. When installing, make sure that the garland cord is not subjected to increased mechanical stress.
  4. Restrict access to the garland to small children and pets. Do not allow children to connect garlands to the mains, it can be dangerous
  5. Connection of garlands for voltage 220V must be carried out through a residual current device (RCD) or a differential circuit breaker. The use of these devices will avoid electric shock in case of accidental contact with live parts, insulation damage and short circuit.
  6. When decorating outdoors, such as the front of your house, do not use garlands and extension cords designed for indoor use. Use garlands according to the instructions for use and the degree of protection against moisture.
  7. The garland should be far away from heaters, open flames
  8. Do not use a large number of garlands at the same time: a short circuit may occur due to overheating of the networks
  9. If you leave the house or go to bed, do not leave the lights on
  10. It is recommended to periodically turn off the garland to avoid melting the plastic or igniting the tinsel.
  11. In case of malfunctions (heating of wires, not natural blinking of bulbs, etc.), de-energize the garlands

Power strip

  1. Do not connect the power strip to a network with a voltage higher than the nominal
  2. It is recommended to connect the power strip to a grounded power supply. It is important to understand that in the absence of grounding in the house and in the outlet, the power strip with grounding will not be able to perform these functions.
  3. Power strips with identification less than IP65 are not recommended for outdoor use
  4. The total power of simultaneously operating devices must not exceed the maximum power specified in the characteristics of the power strip.
  5. After you have connected the power strip, check the tightness of the contact, at the junction of the plug with the socket
  6. Do not touch the power strip with wet hands.
  7. Do not use in places where liquids, moisture, dust and exposure to high temperatures are possible
  8. During use, make sure that the devices are securely connected to prevent poor contact with the risk of short circuit or fire.
  9. Do not cover the power strip with anything during use.
  10. Do not use a surge protector with signs of mechanical damage.
  11. Do not disassemble or repair yourself
  12. Be careful not to leave the cord of the power strip where it can be chafed or pinched.
  13. If you are using a power strip on the floor, try to do it in a place as far as possible from the paths of people, animals and things.
  14. Keep the power strip out of the reach of children and animals
  15. If there is a block with USB charging in the power strip, please read the "Restriction on the use of Chargers"

Car, wall, wireless chargers

  1. Do not connect the charger to a network with a voltage higher than the nominal one, follow the information indicated in the technical specifications
  2. Do not use the charger where it may be exposed to liquid, moisture, dust or high temperatures (open flames, heaters, direct sunlight). The charger works best at temperatures between 0 and 35°C. Do not leave the charger in places where the temperature may exceed 45°C
  3. Do not drop the charger or subject it to strong impacts
  4. Do not attempt to service or repair the charger yourself
  5. Never modify the charger
  6. Use the charger only for its intended purpose
  7. Route all cables (supplied) in such a way that they cannot be caught or tripped over
  8. Do not bend or pinch the cable (supplied)
  9. When disconnecting the cable (supplied), always pull directly on the plug, not on the cable itself
  10. Do not connect or disconnect the charger with damp or wet hands
  11. The charger is for indoor or vehicle use only
  12. Do not use the charger where the use of electronic devices is prohibited
  13. Do not use the charger if the power cord, power source, or end device is damaged or otherwise defective
  14. Do not sleep on the charger, or place the charger under a blanket, pillow, or your body while the charger is connected to a power source
  15. When using a wireless charger, remove metal cases and avoid placing metal foreign objects (such as keys, coins, or jewelry) on it as they may become hot or prevent charging
  16. Unplug your device during a thunderstorm or if you are going to leave the charger for a long time. Do not clean the device with harsh chemical cleaners. Do not clean the device while charging
  17. The charger in the box may contain small parts, plastic parts, or sharp-edged parts that could cause injury or block your airway. Do not leave the CHARGER or accessories within the reach of children or allow them to play with them. Children can injure themselves or others, or accidentally damage the charger